Bending of tubes
DTZ, with curved control by PLC.
Benders of tubes DMZ with digital control of curved, curved hydraulic.
With panel for the control of curved and drives of cylinders through the solenoid valves.
In the digital panel you can see and correct angles of curves quickly.
You can operate the cylinders of torque with the manual function to facilitate the calibration of the machine.
The sequence of several curves can be programmed per piece, this way is scheduled only once for the entire series of parts.
They can be curves of good quality up to Rm = 1, 5 * D with wiper and articulated bullet.
The position of the tube, in forward and swing are manually as in the universal machines.
– Carriage Forward and roll mechanical.
– Two speeds of curved.
– Extension of the length of the machine.
|Maximum diameter of tube||1″ x 2 mm (Carbon steel)||1 5/8″ x 2 mm (Carbon steel)||2″ x 2 mm (Carbon steel)||3″ x 2 mm (Carbon steel)||4″ x 3 mm (Carbon steel)||5″ x 3 mm (Carbon steel)|
|Length of payload||3000mm||3000mm||3400mm||3200mm||3400mm||3900mm|
|Maximum angle of curved||180°||180°||180°||180°||180°||180°|
|Average maximum radius of curvature||145mm (the center of the tube)||145mm (the center of the tube)||160mm (the center of the tube)||160mm (the center of the tube)||230mm (the center of the tube)||400mm (the center of the tube)|
|Control de angulo de curvado||Digital|
|Position of the pipe||Manual, assisted by stops of distance between curves.|
|Command of movements||Synchronized for PLC Siemens brand|
|Shaft diameter||40mm||40mm||50mm||75mm||75mm||95mm with recess to 75mm|
|Electric motor||3x380v. 4Kw||3x380v. 4Kw||3x380v. 4Kw||3x380v. 7,Kw||3x380v. 7,5Kw||3x380v. 11Kw|
|Oil tank capacity||65 lts||65 lts||80 lts||80 lts||90 lts||200 lts|
|Dimensions (width – high – length)||1,0m -1,5m – 3,4m||1,0m – 1,5m – 3,4m||1,1m – 1,5m – 4,2m||1,1m – 1,5m – 4,2m||1,1m – 1,5m – 4,2m||1,5m – 1,7m – 5m|
|Weight||750 Kg.||800 Kg.||900 Kg.||1000 Kg.||1200 Kg.||3000 Kg.|
|Other features||Cylinder puller of bullet, automatic return of the shaper, cylinder to return of gate.||Cylinder puller of bullet, automatic return of the arm, push and return of gate.|